VEST DETAILS
ergonomic shape in one size
- AVALANCHE AIRBAG SYSTEM ENTIRELY INSIDE A VEST
- TESTED & CERTIFIED BY TÜV SÜD PRODUCT SERVICE GMBH
- 174 LITRES HYBRID AIRBAG WITH SIMPLE & RELIABLE INFLATION SYSTEM
- THE SMALLEST SINGLE-USE GAS CYLINDERS
- COMPACT SIZE & EASY TO STORE
-
COMPACT SIZE & EASY TO STORE
durable & waterpellent Cordura® vest main fabric
HYBRID AIRBAG TECHNOLOGY
unique patented airbag system
Compressed gas from the cartridges only inflate the avalanche airbag structural chamber,
the rest of the airbag fills up itself itself with ambient air.
174 litres
total avalanche airbag volume
32 litres
volume of pneumatic structural chamber
filled with gas from the cartridges
51 g
total amount of gas from cartridges
Argon 2x 25,5 g
Argon 2x 25,5 g
3 seconds
time of complete inflation of the avalanche airbag
GAS CARTRIDGES
the smallest avalanche airbag cartridges on the market
- WORLDWIDE SHIPPING
- air travel IATA approved
- manufactured in Austria
simple & reliable inflation system
without spring system, venturi valve or air turbine
- SMALL | length: 140 mm
- THIN | diameter: 30 mm
- LIGHTWEIGHT | 320g cartridges set (2x160g)
-
EASY TO STORE more than one set
(i.e. in a backpack small pocket)
a high pressure compressed gas cartridge requires a cylindrical shape,
two shorter and thinner cartridges instead of one bigger and with a larger diameter allow the airbag inflation system to be more flat and thinner- to fit ergonomically inside
>> AEROSIZE Avalanche Vest.
- 1/2 UNF threaded neck steel cylinder
- mass of gas: Ar 25,5 g ±1,2g
- filling volume: 63 ml
- filling pressure: 22,3 MPa
- test pressure ( 106°C tested): 33,5 MPa
- burst pressure: min. 56 MPa
- Only AEROSIZE gas cartridges can be used for AEROSIZE Avalanche Hybrid Airbag System
- Do not refill disposable cartridges
- When the gas is leaving the cartridge it may cause the cartridge to freeze up – do not touch the empty cartridge with bare hands directly after deployment,
- dispose the cartridges after use the same as of any other products made of steel
- cartridges must not be exposed to temperatures above +50°C (122°F)
- cartridges should be kept away from sources of heat and potrential ignition (direct sunlight, exposed flame, furnaces, etc.).